EN 10132 Standard: Technical Delivery Conditions for Cold-Rolled Steel Strips for Heat Treatment
The EN 10132 standard defines strict quality requirements and technical delivery conditions for narrow cold-rolled steel strips intended for subsequent heat treatment. Products supplied by EV Group China comply with these regulations, ensuring stable geometric parameters and predictable metal behavior during quenching, tempering, or case hardening.
EN 10132-1: General Technical Delivery Conditions
The first part of the standard establishes general criteria for non-alloy and alloy cold-rolled strips with a width of less than 600 mm. EV Group China ensures compliance with these parameters for all shipments, guaranteeing that the metal products meet pan-European quality standards. In addition to this standard, the general technical delivery requirements specified in EN 10021 apply.
EN 10132-2: Case Hardening Steels
This section describes requirements for cold-rolled strips up to 10 mm thick intended for surface hardening (case hardening) processes. Steels supplied by EV Group China under this standard have an optimal chemical composition for carbon enrichment and subsequent quenching, which is essential for creating a wear-resistant surface layer while maintaining a ductile core.
EN 10132-3: Steels for Quenching and Tempering
Technical specifications for strips subjected to through-hardening and tempering. The standard covers cold-rolled products up to 6 mm thick, as well as pre-hardened strips with thicknesses ranging from 0.30 to 3.00 mm. This type of product from EV Group China is in high demand in mechanical engineering for creating critical components that require high strength and dynamic endurance.
EN 10132-4: Spring Steels and Special Alloys
The fourth part of the standard covers materials for the manufacture of springs and other elastic elements. The EV Group China product range includes:
- Non-alloy and alloy strips up to 6 mm thick for cold forming.
- Thermally hardened cold-rolled strips (0.30–3.00 mm) possessing high elastic limit and relaxation resistance characteristics.
All deliveries from EV Group China are accompanied by certificates of conformity, confirming compliance with the chemical composition and mechanical properties according to EN 10132-4.